PV Module – PV SOL60P-260W

PV Module – PV SOL60P-260W

  • Polycrystalline
  • Excellent performance under weak light conditions
  • Guarantee from 0 to +6W as power tolerance, customers can obtain 5,8% power more than conventional output
  • 100% EL test before and after lamination, and finished products EL test,
  • providing higher quality assurance
  • 10 year 91% and 25 year 80% warranty

Technical Specifications

MECHANICAL CHARACTERISTICS

Cable Type Cross – sectional area and length D = 4mm², L= 900 ± 5mm
Type of Connector Compatible Type MC4
Dimension AxBxC 1640 x 992 x 45mm
Weight 18.3kg (40.3lb)
Number of Draining Holes in Frame 16
Glass High Transmission, Low Iron
Tempered 3.2mm
Encapsulation EVA
Back Side White Tedlar
Junction Box (protection degree) IP 67
Frame Clear Anodized Aluminum Alloy Type 6063T5 Frame

QUALIFICATION TEST PARAMETERS

Dielectric Insulation Voltage 6000V DC max
Operating Temperature -40°C to +85 °C
Max Load 5400 Pa
Hailstone Impact 25mm at 23m/s

PACKAGING CONFIGURATION

Packaging Configuration 22 pcs/ box and 2 pcs/ box
Quantity of Big Box / Pallet 1 box / Pallet 1 box / Pallet
Quantity of Small Box / Pallet 10 boxes / Pallet
Loading Capacity 616 pcs / 40′ HQ 240 pcs / 20′ GP

TYPICAL ELECTRICAL CHARACTERISTICS

Product Code MA- 0532
Solar Cell Poly- Crystalline 156X156mm 60pcs (6×10) 3 bus bars
Max-Power 250Wp 255Wp 260Wp 265Wp 270Wp
Power Tolerance 0 + 6W
Voltage at Pmax (Vmp) 30.9V 31.1V 31.3V 31.5V 31.7V
Current at Pmax(Imp) 8.09A 8.2A 8.31A 8.41A 8.52A
Open- Circuit Voltage (Voc) 37.7V 37.9V 38.2V 38.4V 38.7V
Short- Circuit Current (Isc) 8.76A 8.87A 8.99A 9.10A 9.22A
Max- System Voltage (VDC) 1000V (IEC), 600V (UL)
Module Efficiency 15.40% 15.70% 16.00% 16.3% 16.6%
No. of Bypass Diodes (pcs) 3
Max. Series Fuse (A) 12A
Temperature Coefficient of Pmax -0.45%/°C
Temperature Coefficient of Voc -0.34%/°C
Temperature Coecient of Isc 0.05%/°C
Nominal Operating Cell Temperature 45± 2° C

* STC Conditions (1000W / m²; 1.5 AM and 25 °C Cell Temperature)

Be Our Dealer